CALL US: 0203 8118 306

How Much Space Do You Need to Install a Lift?

Working out how much space you need to install a lift is rarely as simple as checking a standard brochure size. Every commercial building has its own structural constraints building services and user needs that affect what is realistically possible.

This guide explains the main spatial requirements for installing a lift in a commercial or multi‑residential building and how early planning can prevent expensive redesigns later on. It is written for building owners facilities managers architects and developers who need a practical overview before speaking to a lift specialist.

Because every project is different the figures below are indicative only. Excel Lift Services can carry out a site survey and design a solution around your actual building layout and constraints.

The three key space questions for any new lift

When you look past the technical language most lift space decisions come down to three questions:

  • How big does the lift car need to be for the people or goods using it?
  • How much space is available for the shaft or enclosure that surrounds the car?
  • Is there sufficient vertical space below and above the car for the pit and headroom?

Once you understand those points you can have a much more focused conversation with your lift contractor about the type of lift and layout that fits your building.

Understanding basic lift space terminology

Different manufacturers use slightly different labels but most commercial lift designs share the same core elements:

  • Lift car – the moving cabin people or goods travel in.
  • Car internal size – clear usable space inside the car.
  • Car external size – the space the car structure itself needs.
  • Lift shaft / lift well – the fixed vertical space the car travels in.
  • Structural opening – the size of the hole the builder must form for the shaft or lift enclosure.
  • Pit – the space below the lowest floor landing.
  • Headroom – the space between the highest floor landing and the top of the shaft.
  • Machine room – where main lift drive equipment is located if the system is not machine room‑less.

Suppliers will normally give both car dimensions and shaft or structural opening dimensions. Make sure you are always comparing like for like when you review different quotations.

What actually drives how much space you need?

There is no single minimum shaft size that fits every project. Instead the space you need depends on a combination of factors:

  • Use and traffic – public buildings and multi‑storey offices typically require larger faster passenger lifts than a small office or low‑rise block.
  • Accessibility – where step‑free access is needed you usually require a car size that comfortably accommodates a wheelchair user and companion.
  • Type of lift – for example a commercial passenger lift a platform lift or a small goods lift all have different space patterns.
  • Drive system – hydraulic traction and machine room‑less (MRL) lifts have different pit headroom and equipment space requirements.
  • Number of stops – more floors usually mean more headroom and pit depth to meet safety and performance requirements.
  • Whether the building is new or existing – with new builds you can design around the lift; in existing buildings the lift often has to work around the structure.

This is why an early design discussion with a company like Excel Lift Services is so useful. You can explore a range of lift types and layouts long before the structure is fixed or walls are opened up.

Typical space requirements for a commercial passenger lift

A full commercial passenger lift offers fully automatic operation higher travel speeds and robust performance for frequent use. Space requirements vary by manufacturer and specification but some broad patterns are helpful at planning stage.

Car size versus shaft size

For a conventional 8 person passenger lift serving office or mixed‑use buildings the following order of magnitude is typical in the UK market:

  • Internal car size: often somewhere around 1.1–1.4 m wide by 1.4–1.6 m deep
  • Structural shaft opening: often broadly in the region of 1.7–2.0 m wide by 1.7–2.0 m deep

Those figures are deliberately broad and should not be used for construction without confirmed drawings. They do however illustrate an important point: the shaft normally needs noticeably more space than the car because it must allow for the car frame guides counterweight and clearances.

Pit and headroom allowances

In addition to the horizontal shaft dimensions you also need sufficient space above and below the car:

  • Pit depth – often at least several hundred millimetres and in many commercial passenger lifts somewhere in the region of 1–1.2 m below the lowest landing
  • Headroom – often from around 3.5 m above the top landing upwards depending on speed and lift type

Again exact requirements depend on the system design standards applied and any mitigating measures available. In existing buildings with limited pit or headroom a specialist may suggest reduced pit or headroom solutions but these need careful engineering and sometimes additional safety features.

Machine room or machine room‑less?

Traditional traction lifts usually have an external machine room above or beside the shaft. This needs additional structural floor area and safe access. Machine room‑less (MRL) traction lifts place the main drive equipment within the shaft itself which can be very helpful where space is tight or where you wish to free roof space for other uses.

An MRL design does not remove the need for access and working space around machinery but it can reduce the overall building area dedicated to the lift.

How much space does a platform lift need?

Platform lifts can be a practical option where passenger lift space or budget would be difficult especially for shorter travel heights or when you need step‑free access for wheelchair users.

A through‑floor or vertical platform lift typically uses an enclosed platform rather than a full passenger car. As a very general guide:

  • Platform size – often designed around a clear platform large enough for a wheelchair user and possibly a companion
  • Overall footprint – can be relatively compact compared with a conventional passenger lift shaft
  • Pit and headroom – often much shallower pit and lower headroom requirements than a full passenger lift

Platform lifts can sometimes be installed using a self‑supporting structure rather than a traditional concrete shaft which may simplify works in existing buildings. They are however suited to particular patterns of use and travel rather than acting as a direct replacement for every passenger lift scenario.

Space planning for new‑build projects

If you are at RIBA early design stages you have far more flexibility to plan around the lift instead of forcing a solution into fixed structure. Some practical steps include:

Engage a lift specialist before layouts are frozen

Involving Excel Lift Services while floor plates and cores are still fluid allows you to:

  • Test different car sizes against traffic modelling and occupancy assumptions
  • Compare the space and structural implications of hydraulic traction or MRL options
  • Plan realistic pit and headroom from the outset
  • Coordinate lift positions with stairs lobbies and escape routes

Adjusting lift size or shaft position on paper is far easier and cheaper than reworking concrete or steel later.

Allow for future flexibility

Where possible design shaft space with some tolerance for future modernisation or increased capacity. For example:

  • Allowing a slightly larger shaft may make future car size increases easier
  • Keeping plant and structural elements away from the shaft walls can create more room for alternative drive systems later
  • Ensuring good access routes to the shaft top and pit helps maintenance and future upgrades

Excel Lift Services can advise how proposed shaft dimensions may affect future options.

Fitting a lift into an existing building with limited space

Retrofitting a lift into an existing commercial building is nearly always more constrained than a new build. Common challenges include narrow stairwells low floor‑to‑ceiling heights and existing services running exactly where a shaft would ideally go.

Survey and feasibility first

A detailed site survey is essential before you commit to a particular lift size or type. During a survey a specialist will typically:

  • Measure available space at each floor including floor‑to‑floor heights
  • Identify structural walls beams and potential load paths
  • Check locations of services such as ducts pipes and cabling
  • Assess possible pit formation and headroom
  • Review building access for bringing in lift components

From there the designer can suggest realistic options which may include reduced pit or headroom solutions smaller cars or alternative shaft positions.

Creative positioning options

Where a conventional central shaft is not practical you might consider:

  • External shafts – adding a freestanding or attached lift tower to the outside of the building
  • Stairwell installations – inserting a compact shaft within an existing stair core where space and fire design permit
  • Re‑using existing ducts or voids – for example old light wells service risers or disused lift shafts
  • Offset or corner cabins – adjusting door and car orientation to work around structural constraints

All of these require careful structural and fire design input which is why an integrated approach between your design team and lift specialist is important.

Doors lobbies and circulation space

It is easy to focus on shaft dimensions and overlook the space around the lift. In practice:

  • You need sufficient door width for intended users whether that is goods trolleys or mobility equipment
  • You require clear landing space in front of the doors for safe manoeuvring
  • Lift lobbies should integrate with escape routes and general circulation

Where wheelchair access is relevant you should take specialist access design advice. There are British Standards and design guidance that influence typical preferred widths and turning spaces but the precise requirements for your project depend on building use layout and the wider accessibility strategy.

How do regulations and standards affect space?

Lift design in the UK usually interacts with several layers of regulations and standards for example relating to lift safety accessibility building regulations and fire safety. Specific requirements depend on the lift type and building classification.

Rather than quoting particular clauses or numbers which may date quickly it is safer to treat them as design drivers. For instance:

  • Some standards influence preferred car sizes for different numbers of passengers or for wheelchair access
  • Lift safety standards affect minimum clearances in the shaft pit and headroom
  • Fire and building regulations affect shaft construction lobby design and separation which can in turn affect how and where you can position a lift

A competent lift designer will work within the appropriate standards for your chosen lift type and advise where project‑specific fire or access strategies may affect space. Because regulations and guidance can change you should always work from current documentation and professional advice rather than relying on generic rules of thumb.

Space considerations for different lift drive types

Although performance and lifecycle costs often drive the choice of drive system space also plays a part.

Hydraulic lifts

Hydraulic passenger lifts can be useful in certain low‑rise commercial buildings. They often have:

  • Relatively compact shaft dimensions
  • Moderate pit and headroom requirements
  • A separate space needed for the hydraulic power unit which can sometimes be positioned at a lower level or adjacent room

The trade‑offs include energy performance and ride characteristics compared with traction systems. Your lift consultant can weigh these against any space benefits.

Traction and MRL traction lifts

Gearless traction lifts are widely used in mid‑ and high‑rise commercial buildings. They typically offer:

  • Good energy efficiency and ride quality
  • Flexible car and door configurations
  • Options with or without a separate machine room

MRL traction lifts can be especially helpful where roof plant space is at a premium or where planning constraints make external machinery rooms awkward. They still require adequate headroom for the machinery within the shaft so you should not assume that headroom can be dramatically reduced compared with a conventional traction layout.

What if you simply do not have enough space?

In some older or highly constrained buildings you may feel there is nowhere obvious for a compliant lift. Before you conclude that a lift is impossible it is usually worth exploring the following with a specialist:

  • Alternative lift types – for example a platform lift instead of a conventional passenger lift for limited travel
  • Re‑configuring internal layouts – moving partitions or stair flights to create a shaft zone
  • External additions – where planning allows an external shaft can sometimes transform viability
  • Reduced pit or headroom solutions – where structural limits are unavoidable and design standards allow mitigation

There are however cases where structural or planning constraints means only limited forms of lifting equipment are realistic. A site‑specific feasibility study will give you a clearer view of what is genuinely achievable and where compromises might fall.

How space planning links to long‑term maintenance and upgrades

Space decisions you make today will affect the lift throughout its life:

  • Tight shafts can restrict future car enlargements or drive upgrades
  • Minimal maintenance space can make servicing more awkward and time‑consuming
  • Unusual layouts may limit the choice of replacement equipment later

Excel Lift Services designs new lift installations with long‑term maintainability in mind aiming to avoid solutions that only work because of bespoke parts or unusual clearances. That forward‑looking approach can help reduce lifecycle costs and disruption.

Cost implications of space decisions

While this article focuses on space rather than cost the two are closely linked. As a broad indication in the UK:

  • A small commercial platform lift might fall from tens of thousands of pounds upwards
  • A conventional commercial passenger lift installation will often sit somewhere from the higher tens of thousands into six figures depending on travel height specification and building works
  • Complex retrofits in tight spaces typically cost more than straightforward new‑build cores due to structural adaptations and bespoke design

Because building works structural changes finishes and access arrangements vary so much the best next step is always a bespoke quotation based on measured surveys and an agreed performance brief.

Practical next steps

If you are trying to decide whether you have enough space for a lift it can help to:

  • Clarify the intended users and traffic levels for the lift
  • Gather as‑built drawings floor‑to‑floor heights and any structural information you have
  • Identify any obvious candidate areas for a shaft internally or externally
  • Speak to a lift specialist early rather than committing to a particular shaft size in isolation

Discuss your project with Excel Lift Services

Excel Lift Services works with commercial landlords facilities managers and design teams across the UK to plan install and maintain lifts in a wide variety of buildings. From straightforward new‑build passenger lifts to complex retrofits in restricted spaces the team can help you understand what is realistically possible in your building.

If you would like to explore how much space you need for a lift in your property the next step is usually a site visit or a design discussion based on your drawings. Excel Lift Services can then propose suitable lift types outline indicative shaft pit and headroom requirements and provide a tailored quotation.

To discuss your project or arrange a survey contact Excel Lift Services via the website at excellifts.co.uk/ or speak to the team by phone or email.

Are You In Need Of Elevator Repair?

Speak to us today for more information on the range of lifts we repair and install.