CALL US: 0203 8118 306

How Can You Make an Existing Lift More Energy Efficient?

Rising energy prices and carbon reduction targets mean many building owners are looking closely at how much power their lifts use. You may not be ready to replace a lift completely yet but there are usually practical upgrades that can make an existing lift more energy efficient.

This guide looks at realistic options for commercial buildings in the UK. It focuses on changes that can reduce running costs and improve reliability without compromising safety or accessibility.

Why lift energy efficiency matters for commercial buildings

Lifts are essential in many offices, healthcare sites, schools and multi-storey residential and mixed-use buildings. They often run all day which means even modest efficiency improvements can add up over time.

Main reasons to improve an existing lift rather than wait for replacement

  • Energy costs – A dated lift can draw significantly more power than a modern equivalent particularly at peak times.
  • Carbon reduction plans – Many organisations now report on operational emissions. Lifts sit within that operational energy use.
  • Occupier expectations – Tenants increasingly expect buildings to be efficient and well maintained which includes vertical transport.
  • Delaying full replacement – Energy focused modernisation can extend the useful life of a lift and spread capital spending more gradually.
  • Improved reliability – A number of energy saving upgrades also remove obsolete components and improve day-to-day performance.

Every lift is different so the most appropriate improvements depend on its age, type, usage pattern and condition. A detailed survey by a competent lift specialist is the safest way to identify realistic savings.

First step: understand how your lift is currently performing

Before planning any upgrades it helps to have a clear picture of the current situation. In many commercial buildings the lift has been in place for years and information about it can be incomplete.

Key questions to ask about your existing lift

  • What year was it installed and has it been modernised before?
  • Is it traction or hydraulic and does it have a machine room?
  • How many floors does it serve and what is its rated load?
  • How busy is it on a typical weekday compared with evenings or weekends?
  • Have you had frequent breakdowns or performance complaints?
  • Roughly how much of your building’s electricity bill is attributed to the lift (if known)?

Your current maintenance provider or a modernisation specialist such as Excel Lift Services can usually help you gather this information and carry out a condition survey. From there you can start to look at which upgrades are feasible and how they might fit into other planned works in the building.

Energy saving opportunities in an existing lift

In most commercial lifts the biggest energy savings tend to come from improving the drive and control system then from auxiliary systems such as lighting and ventilation. The exact split varies but it is common to approach the project in stages starting with measures that give the best payback.

1. Upgrade the drive and control system

The drive equipment is usually the single largest consumer of power in a lift installation. Older drives can be significantly less efficient than modern equivalents.

Variable frequency drives for traction lifts

Many older traction lifts use less sophisticated control equipment that draws relatively high current during acceleration and deceleration. Modern variable frequency drives (VFDs) control the motor speed much more precisely. Potential benefits can include:

  • Lower peak power demand
  • Smoother acceleration which also helps passenger comfort
  • Reduced wear on mechanical components
  • Improved overall energy efficiency particularly in busy lifts

Retrofitting a VFD is not always possible on very old gear or where there are compatibility issues but where it can be applied it is often one of the more impactful energy upgrades.

Modernising hydraulic lift controls

Hydraulic lifts are typically less efficient than traction systems because energy is lost as heat in the hydraulic oil particularly during repeated journeys. That said there are steps that can reduce energy use compared with an outdated hydraulic set-up:

  • Fitting more efficient pump and valve assemblies
  • Upgrading to smart control systems that reduce oil circulation when the lift is idle
  • Installing soft-start equipment to reduce peaks in power demand
  • Improving the efficiency of the motor itself where feasible

If your hydraulic lift is quite old you may reach a point where a change of technology is worth considering but in many commercial buildings a targeted control upgrade still offers a useful improvement at lower cost than full replacement.

New group control and traffic management strategies

In multi-lift installations modern group control algorithms can significantly reduce wasted journeys. By analysing call patterns the system can:

  • Park cars in locations that minimise unnecessary runs
  • Switch some lifts to standby during quiet periods
  • Reduce the number of starts by grouping passengers more efficiently

These changes need to be designed carefully so they do not create unacceptable waiting times. An experienced modernisation engineer should balance energy savings with the service level your occupants expect.

2. Consider regenerative drive technology

In many traction lifts the car is balanced against a counterweight. When a loaded car travels down or an empty car travels up the motor can act as a generator. A regenerative drive captures this energy and feeds it back into the building’s electrical system where it can be reused.

The suitability of regenerative drives depends on the lift type and usage pattern. They tend to offer better payback where:

  • The lift serves many floors and runs frequently through the day
  • There is a mix of loaded up and down journeys
  • The building’s electrical system can accept the regenerated power

There are technical and compatibility checks to carry out including harmonic distortion and coordination with other building systems. A specialist such as Excel Lift Services would usually work with the building’s electrical consultant to confirm what is achievable and safe.

3. Improve lift car lighting and controls

Lighting may seem minor compared with the drive but in a 24/7 building the lift car lights can be on for thousands of hours each year. Older fluorescent or incandescent fittings typically consume far more power than modern alternatives.

LED lighting upgrades

Replacing older light sources with quality LED units can substantially cut energy consumption. Further benefits include:

  • Longer lamp life which reduces maintenance visits
  • Lower heat output which can help reduce the load on ventilation or air conditioning near the lift
  • Good light quality which can improve the feel of the car interior

When changing lighting within a lift car it is important to consider escape lighting and emergency provisions so that safety is not compromised. Your lift provider should select products suitable for lift environments and compatible with any existing emergency control system.

Automatic lighting control

Fitting presence detectors or automatic time-out controls so car lighting dims or switches off after the lift has been idle for a set period can deliver additional savings particularly in lifts that see intermittent use. Settings need to be chosen carefully so that passengers never find themselves in darkness while using the lift.

4. Tackle standby and auxiliary power use

Modern lifts use electronic control systems which often draw some power even when the lift is not moving. There may also be car ventilation fans, indicators, communication equipment and door operators running continuously.

Upgrades that can help reduce this background consumption include:

  • Standby modes for car operating panels and displays
  • Automatic speed reduction or shut-off for car ventilation fans when the lift is idle
  • Optimised door control so motors are not powered for longer than necessary
  • Replacement of outdated relays or contactors with more efficient control equipment where appropriate

In some cases a large proportion of a lightly used lift’s annual energy may be down to standby loads rather than movement. Addressing these can therefore be particularly worthwhile in residential or mixed-use buildings where traffic is variable.

5. Review doors, guides and mechanical efficiency

The smoother a lift runs the less energy it typically needs to complete a journey. Mechanical modernisation can support this by reducing friction and improving balance.

  • Door operators – Modern door drives are often more efficient and allow better adjustment. Well adjusted doors also reduce the risk of reversals and nudge cycles which waste energy.
  • Guide shoes and rollers – Updating worn or outdated guide equipment can cut friction and vibration.
  • Balancing and counterweighting – In traction lifts correct balancing reduces the energy required to move the car.
  • Hydraulic pipework and valves – In hydraulic lifts improving valve control and eliminating restriction can reduce heat losses.

Mechanical improvements are often undertaken alongside control upgrades as part of a broader modernisation package.

6. Integrate lift strategy with the wider building

Lifts do not operate in isolation. How you use them and how they interact with other services in the building can influence overall efficiency.

  • Traffic management policies – In some buildings it is possible to adjust how staff use lifts and stairs particularly at peak times while still respecting accessibility needs.
  • Coordination with BMS – Lifts may be able to communicate with the building management system so that certain modes are enabled during off-peak periods subject to safety requirements and manufacturer limitations.
  • Peak planning – Where practical staggering occupancy or shift patterns can reduce excessive lift cycling at particular times of day.

Any changes of this type should be discussed with your lift specialist and facilities management team so that accessibility and safety are not affected.

Do energy upgrades affect lift safety or accessibility?

Energy efficiency measures should never undermine safety or accessibility. In the UK lifts must comply with relevant legislation and standards. For new installations and major changes this often involves reference to standards such as BS EN 81 series and accessibility guidance for disabled people. Fire safety and evacuation arrangements must also be respected.

When you modernise a lift certain alterations can trigger additional requirements depending on the extent of the work and the age of the original installation. For that reason it is important that any upgrades are designed and installed by a competent lift company that understands current standards and can work with your fire and access consultants where needed.

Examples of considerations include:

  • Maintaining or improving compliance with accessibility features such as car controls and signalling
  • Ensuring emergency communication still functions if you change power arrangements or standby modes
  • Confirming that any regenerative equipment or new drives integrate safely with the existing machinery
  • Checking that changes to door operators or controls do not affect fire compartmentation around the lift entrances

In many cases energy saving modernisation is also an opportunity to improve safety and accessibility by updating older components and controls in line with current good practice.

Planning an energy efficiency upgrade project

Once you have identified potential measures the next step is to plan how and when to carry out the work. For commercial building decision-makers there are usually several factors to weigh up.

1. Survey and feasibility

A detailed survey by a lift specialist will usually cover:

  • Condition of existing drive, control panels and machinery
  • Type and state of doors, car interiors and signalling
  • Usage data where available or practical estimates where not
  • Electrical supply characteristics and coordination with other equipment
  • Any existing compliance issues or known obsolescence

From this the specialist can propose options such as control system replacement, drive upgrades, LED lighting and standby modes with indicative savings where they can be reasonably estimated.

2. Phasing and downtime

Few occupiers will accept long periods without lift service. Your provider should help you phase works to minimise disruption such as:

  • Working on one lift at a time in a group so that at least one car remains in service
  • Planning noisy or invasive works outside core operating hours where possible
  • Coordinating with other building projects to avoid repeated shutdowns

For single-lift buildings it may be necessary to plan for short outages with clear communication to occupants and alternative arrangements for those who cannot use stairs. This needs early discussion especially in healthcare educational or residential settings.

3. Budget and cost ranges

Costs vary widely depending on the size of the lift, its age, site conditions and the scope of work. As a very broad indication in the UK:

  • LED lighting and simple standby controls can often sit in the lower thousands of pounds per lift
  • Control system and drive replacements may run into the tens of thousands of pounds for a typical commercial passenger lift
  • Extensive modernisation with new machinery doors and controls will usually be higher again approaching a significant proportion of a full replacement cost

Because each installation is different the most reliable way to understand costs is to obtain a tailored quotation following a survey. A company like Excel Lift Services can also help you prioritise works into stages that align with your capital budget.

4. Assessing payback and wider benefits

Energy savings are an important part of the business case but they are not the only factor. When looking at return on investment consider:

  • Estimated kWh savings where these can be sensibly modelled
  • Reduced maintenance and call-out costs due to newer equipment
  • Improved reliability and less disruption for tenants
  • Contribution to corporate sustainability or ESG objectives
  • Any uplift in building appeal for occupiers and future buyers

Lifts operate for many years so even moderate annual energy reductions can become significant across the lifetime of the equipment.

When does it make sense to replace rather than upgrade?

There is a point where upgrading an existing lift delivers diminishing returns compared with replacement. Signs that you may be approaching this include:

  • Major components such as the machine or cylinder are life-expired or obsolete
  • The lift has persistent reliability issues despite regular maintenance
  • The layout or size of the car no longer meets the needs of the building
  • Meeting current accessibility or safety expectations would require very extensive changes

Even if replacement looks likely it can still be valuable to understand short-term energy saving opportunities particularly if full replacement is several years away. A lift specialist can outline both tracks so you can plan budget and phasing sensibly.

Working with Excel Lift Services on energy efficient modernisation

Improving the energy efficiency of an existing lift is rarely about a single component. It is usually a combination of control upgrades, mechanical improvements and careful tuning all within the constraints of your building and your occupiers’ needs.

Excel Lift Services works with commercial landlords, managing agents, facilities managers and public sector organisations across the UK to modernise existing lifts. The team can:

  • Survey your current lifts and highlight realistic energy saving options
  • Advise on suitable control and drive upgrades for traction or hydraulic systems
  • Design modernisation packages that also address reliability and compliance
  • Plan works to minimise downtime and disruption for tenants
  • Provide ongoing maintenance to keep equipment running efficiently

If you are reviewing your building’s energy performance or planning a wider refurbishment, it can be a good time to look at your lifts as part of the overall strategy.

To discuss how you can make an existing lift more energy efficient in your building, contact Excel Lift Services via the website or speak to the team to arrange a survey and tailored modernisation proposal.

Are You In Need Of Elevator Repair?

Speak to us today for more information on the range of lifts we repair and install.