CALL US: 0203 8118 306

Can You Install a Lift in an Existing Building?

For many commercial building owners the question is not whether a lift would be helpful but whether it is realistically possible to add one to an existing structure. Space, cost, disruption and regulations all come into play and it can be difficult to know where to start.

This guide looks at what is usually possible when you want to install a lift in an existing building, which constraints matter most and how a specialist like Excel Lift Services approaches a retrofit project.

Is it actually possible to install a lift in an existing building?

In many UK commercial buildings it is possible to install some form of lift, even where space and structure are challenging. The key question is often not “can we have any lift?” but “what type of lift and layout are realistic here?”

There are three common scenarios.

1. You have an old or redundant lift

If there is already a lift shaft the options are usually broader. You may be able to:

  • Replace the existing lift with a modern equivalent
  • Install a different drive system using the same shaft
  • Reconfigure doors and entrances to improve circulation

Reuse of an existing shaft is often the most cost effective route because much of the structural work is already in place.

2. You have a stair core that might take a lift

Many retrofits involve using space within or beside a staircase. In some buildings the stair void is wide enough to accommodate a lift shaft while still maintaining safe escape widths. In others it may be possible to add a shaft adjacent to the stairs by taking some floor area from landings or circulation space.

3. You have no obvious suitable space

Even when internal options are limited you may still be able to add a lift:

  • Externally by building a lift shaft on the outside face of the building and cutting through at each floor
  • In a courtyard or lightwell with a glazed or steel structure
  • Using a smaller footprint system such as a compact machine room-less passenger lift or a platform type where appropriate

The feasibility depends on structure, planning constraints and how the building is used.

The key factors that determine what is possible

Each building is different but there are some recurring constraints that strongly influence what kind of lift you can install and how straightforward the project will be.

Available space and layout

Lift design is heavily driven by the space you have, particularly:

  • Shaft footprint – the size of the opening available for the lift car and its running clearance
  • Headroom – space above the highest landing for lift machinery and safety zones
  • Pit depth – space below the lowest landing for buffers and safety components
  • Landing arrangement – how passengers will approach and leave the lift on each floor

In existing buildings it is common to work with reduced headroom or pit depths. Modern lift equipment can sometimes be specified to suit these constraints but there will usually be minimum dimensions that cannot be compromised for safety reasons.

Building structure and load paths

A lift adds concentrated loads into a building and may require new openings in floors or walls. A structural engineer will typically look at:

  • Whether existing walls are strong enough to support the shaft or guide rails
  • If new steelwork is needed to form a self-supporting shaft
  • How forces will be transferred down to foundations
  • The effect of cutting through floors for the shaft and lift entrances

In older properties you may need strengthening works or independent steel structures to avoid overloading existing fabric.

Building use and occupancy

The way your building is used affects the type and size of lift that makes sense. An office, retail unit, school or healthcare facility will all have different patterns of traffic and expectations:

  • How many people might use the lift at peak times
  • Whether you will need to transport trolleys, wheelchairs or goods
  • Whether the lift will be for staff only or public use
  • Any particular security or access control requirements

This is important not only for comfort and convenience but for wider building management, queuing and escape planning.

Services and existing building systems

Existing services can sometimes limit where a lift can go or increase the complexity of alterations. During feasibility design your lift contractor and professional team will consider:

  • Routes for new power supplies and control cabling
  • Relocation of plumbing, heating, ventilation or air conditioning ducts that conflict with a proposed shaft line
  • Interaction with sprinklers, fire alarm detection and sounders
  • Any protected routes for emergency services or communication systems

Planning these adjustments early helps reduce surprises once work starts on site.

Planning and external appearance

If you intend to add a lift externally or alter the building facade in a visible way you may need planning consent. Requirements vary between local authorities and will depend on factors such as:

  • Whether the building is in a conservation area
  • If it is listed or has particular heritage value
  • The impact of any new structure on neighbouring properties
  • External materials, height and overlooking

For standard commercial buildings with modest changes internal-only lift works may be treated differently from external shafts or extensions, although it is always sensible to check with your design team and local planning authority early on.

How regulations influence retrofit lift projects

Lift installations in the UK sit within a framework of product safety rules, building regulations and standards. The detail is complex and can change over time so building owners will normally rely on competent professionals to interpret and apply the right requirements. However it is useful to understand some broad principles.

Building Regulations and accessibility

New building work in England is generally expected to comply with the Building Regulations and associated guidance documents such as Approved Document B (fire safety) and Approved Document M (access to and use of buildings). Comparable guidance applies in Scotland Wales and Northern Ireland under their own regulatory systems.

When you retrofit a lift into an existing building the regulations that apply will depend on the scope of works. As a general rule:

  • New lift shafts, extensions and structural alterations will usually come under Building Regulations control
  • Lifts are commonly expected to support reasonable access to and use of the building for occupants and visitors where this is practical
  • Fire safety strategies and means of escape may need to be reviewed where access routes or compartmentation are changed

Exact obligations can be nuanced and may involve professional judgement from building control bodies fire engineers and access consultants rather than fixed rules for every scenario.

Equality considerations

Under the Equality Act 2010 service providers and employers have duties not to discriminate against disabled people. In practice this may include taking reasonable steps to remove physical barriers or provide alternative ways to access services. Adding or improving a lift in a workplace or public building is sometimes part of a wider strategy to meet these duties.

The Act does not set specific technical lift requirements and whether a particular adaptation is considered “reasonable” can depend on building constraints cost and practicality. It is usually wise to discuss accessibility aims early so that the lift design supports them as far as is realistic.

Lift safety and product standards

Newly installed lifts for the transport of persons or goods are generally expected to comply with relevant UK legislation and standards at the time of installation. For typical passenger lifts this may include reference to standards such as BS EN 81 series and related guidance. Platform lifts and service lifts may fall under different parts of the standards family.

A competent lift contractor will design specify and install equipment to the appropriate category for its intended use. They should also supply documentation such as user instructions and maintenance guidance on completion.

Types of lift commonly used in existing buildings

There are several categories of lift that may be considered for a retrofit project. The right choice depends on building constraints and how the lift will be used day to day.

Conventional passenger lifts

For many commercial buildings a conventional passenger lift is still the most robust long-term solution. These normally run in a fully enclosed shaft and can be configured in various sizes and capacities. Modern equipment can be designed without a separate machine room which helps when space is tight.

Passenger lifts tend to offer:

  • Higher travel speeds than most platform lifts
  • Durability under regular intensive use
  • Flexibility to handle wheelchairs, trolleys and small goods
  • Integration with destination control or access systems where needed

They do however need a suitable shaft and are usually a more involved construction project than compact lifting platforms.

Platform style lifts

Platform style lifts can sometimes provide a solution where space or structural capacity are more limited or where travel distances are modest. There are several sub‑types with different characteristics and regulatory frameworks. Some are designed for lower speeds and traffic levels than full passenger lifts.

They may be considered where:

  • Only a small number of people need access between levels
  • Speeds can be lower without affecting building operation
  • Structural alterations must be kept to a minimum

Choosing between a conventional passenger system and a platform style solution involves balancing capital cost space technical limitations and the demands of your occupants. A lift specialist can outline what is realistic for your particular building without pre‑empting decisions that overlap with other articles in this content series.

Typical stages when adding a lift to an existing building

A structured approach makes retrofit projects more predictable. While each scheme is unique a typical process might look like this.

1. Initial feasibility review

The aim at this stage is to establish whether a lift is broadly achievable and what forms it might take. This often includes:

  • A site visit and measured survey of the existing building
  • Identification of possible shaft locations and landing arrangements
  • High-level checks on headroom, pit depth and structural constraints
  • Early thoughts on planning, fire safety and access considerations

For some buildings it will quickly become clear that only certain types or sizes of lift are realistic. In others there may be a choice between several options with different pros and cons.

2. Concept design and budgeting

Once there is a feasible location the lift contractor can work with your design team to produce concept layouts and outline specifications. At this point you can usually obtain budget-level cost ranges for:

  • Lift equipment and installation
  • Builder’s work in connection with the lift (shafts, openings, finishes)
  • Power supplies and associated services modifications
  • Any structural strengthening required

Retrofit lift projects can vary significantly in cost depending on scale complexity and finishes. For commercial buildings it is not unusual for full project costs including building works to run into tens of thousands of pounds and sometimes considerably more for large or complex schemes. A bespoke quote based on measured information is the only reliable way to understand figures for a specific building.

3. Coordination with fire and access strategies

Before committing to detailed design it is important to ensure that the proposed lift works sit comfortably within the wider building strategy. This may involve input from:

  • Fire engineers or competent fire safety professionals
  • Access consultants particularly for buildings serving the public
  • Building control bodies or approved inspectors

Topics can include travel distances to exits, compartmentation around shafts, smoke control and how the lift will behave in a fire signal. Where particular types of lift are being considered for evacuation or firefighting purposes further detailed guidance applies and will normally require specialist design input.

4. Detailed design and approvals

With the overall approach agreed the design can be developed to construction level detail.

  • The lift contractor finalises technical drawings and performance specifications
  • Structural details for the shaft, openings and supports are confirmed
  • Architectural finishes for landings and car interiors are chosen
  • Submissions are made for building control and where needed planning approval

At this stage you should have a clear programme a firmer cost plan and an understanding of any temporary arrangements needed during works.

5. Installation and commissioning

Lift installation in an existing building is a coordinated activity between several trades. You can expect:

  • Enabling works such as hoardings, service isolations and strip out
  • Construction or adaptation of the shaft and pits
  • Delivery and installation of lift components
  • Testing, adjustment and safety checks by the lift contractor
  • Independent examination and certification as required

Good planning and communication helps minimise disruption to building users particularly in occupied premises.

6. Ongoing maintenance and inspection

Once in service a lift needs regular maintenance and statutory examinations to remain safe and reliable. Routine tasks are usually handled by a lift maintenance provider under a service contract while formal thorough examinations are arranged with a competent person such as an inspection body under applicable health and safety legislation.

Managing disruption during a retrofit lift project

Many building owners worry about the effect of construction works on tenants staff and visitors. Although some disturbance is inevitable there are practical ways to limit the impact.

Phasing and timing

Where possible, noisy or disruptive work can be scheduled for:

  • Out of hours or weekends
  • School holidays for education buildings
  • Planned shutdowns or quieter trading periods for commercial premises

Temporary signage and clear communication help people adjust to altered routes or restricted areas.

Temporary access arrangements

If existing lifts are being replaced there may be periods where vertical access is more limited. Depending on the building type you may wish to consider:

  • Phasing works so that not all lifts are out of service at once
  • Temporary relocation of certain functions or services during the works
  • Alternative arrangements for users who find stairs difficult

These arrangements should be considered alongside any duties you may have under health and safety and equality legislation.

Common misconceptions about installing a lift in an existing building

Certain assumptions can discourage building owners from exploring options. A feasibility review often shows that the situation is more flexible than expected.

“We do not have a spare stairwell so a lift is impossible”

While stairs are a common location they are not the only one. You may be able to create a compact shaft in part of an office area replan circulation space or add a structure externally where planning and structure allow.

“Our building is too old”

Age alone rarely prevents lift installation. Many Victorian, Edwardian and mid‑century buildings across the UK successfully accommodate modern lifts. The works may be more bespoke and there can be heritage constraints but suitable solutions are often available.

“The project will always be prohibitively expensive”

There is no doubt that a new lift in an existing building is a significant capital investment. However costs vary widely depending on specification, finishes and the extent of building alterations. In some relatively straightforward retrofits the overall spend may be lower than expected. A tailored budget study is the most reliable way to decide whether a project is viable.

Why involve a specialist like Excel Lift Services early?

The earlier you bring a lift specialist into discussions the more freedom you have to shape a workable scheme. Excel Lift Services works with building owners, facilities managers and professional teams across a range of commercial and public buildings to design and install lifts that suit existing structures.

On a typical project Excel Lift Services can:

  • Carry out an initial site review to identify realistic lift options
  • Highlight key structural, services and regulatory constraints
  • Suggest suitable equipment types for the intended use
  • Provide budget cost guidance to support investment decisions
  • Coordinate closely with architects, engineers and building control
  • Deliver installation then ongoing maintenance for long term reliability

Next steps if you are considering a lift for your existing building

If you are weighing up whether you can install a lift in your building the most productive next step is usually a structured feasibility discussion rather than jumping straight to detailed quotations.

Gather whatever information you have such as floor plans, sections and any previous lift or structural reports then speak to a competent lift contractor. They can often give an initial steer on what is likely to be achievable in your building and what further surveys or design work would be useful.

Excel Lift Services helps commercial building owners and managers across the UK understand what is possible in their existing properties. To discuss options for your site or arrange an initial survey you can contact Excel Lift Services via the details on their website at excellifts.co.uk/.

Are You In Need Of Elevator Repair?

Speak to us today for more information on the range of lifts we repair and install.